CN
EN
??
Espa?o Products center Location：Home > Products center
-
Z2 series multi-function built-in sensor push pull Parts: AC Adapter Small hook, flat head, convex mouth, concave tip, extended rod, large hook, Y hook Ｉ-1 Ｉ-2 Ｉ-3 Ｉ-4 Ｉ-5 Ｉ-6 Ｉ-7 I-8 （A-1） （A-2） （A-3） （A-4） （A-5） （A-6） Note: series I is made of iron, and series A is made of aluminum.50N and below recommended series A, 100n-1000n recommended I.The hook and y-hook are only used for 1000N testing. USES: 1. Simple determination of tension spring, rubber and other forces. 2. Operation force measurement of ... -
Z2S-DPU series external sensor push-pull meter DPU series sensor use: 1. Simple measurement of the strength of the tension spring and rubber. 2. Measurement of the operating force of the switch button: telephone, computer, remote control. 3. The insertion force and pull-out force of the connector can be tested at the same time. 4. The peak cracking force of new materials such as glass, carbon, ceramics and plastics is captured. 5. Measurement of bending force of thin plates, round bars, wood, etc. 6, peel test: tape, PCB, adhesive ... -
MSA-0.5K2-(500N) series force-displacement electri The machine achieves a high repeatability test of force-displacement at a constant test speed, digitally sets the test mode and test speed, and provides the functions of strength test and displacement test together. ◆Set the moving distance according to the sample height ◆Automatically change the driving speed and measuring speed with the set force value ◆Start the software together with the test bench movement ◆ Ergonomic tilt control panel ◆Digital setting dialing operation ◆Three test modes to mee... -
G80 Bench tester 1、 Suitable for aerospace, high-speed trains, new energy sources for automobiles, etc. High precision, high resolution, high sampling rate requirements. 2、 Multi-parameter design (force value, torque, length, angle, pulse, time optional). 3、 Built-in real-time clock for real-time time and date 4、 Peak, real-time values, and test process curves are displayed on the same screen to monitor and trace the entire test process 5、 There is analog real-time signal output (optional). 6、 St... -
MX-1000N electric vertical force measuring machine The MX series force measuring machine has three test modes: Manual speed regulation, manual fixed speed, automatic cycle fixed speed. Range: 1000N (about 100kgf) Stroke: 410mm Speed: 10-300mm/min Voltage: AC100-240V Function: Emergency cut-off switch, adjust the travel limit up and down, you can choose various speeds or maximum speed. Optional: encoder, length meter, longer stroke, speed change. application: Testing of various materials within 1000N. (measuring tensile strength, pressure strength, ...
推薦產品 RECOMMENDED PRODUCTS
- Tel:0086-574-87834466 0086-574-87890640
- Fax:0086-574-87890641
- E-mail:sales@fff-motive.com
- Website:www.zchaoyun.com
- Add:No. 999, Mingshu Road, Jiangshan, Ningbo
Share：
