CN
EN
??
Espa?o Products center Location：Home > Products center
-
QLS-0200 Summary This type is mainly used for rotating torque detection, measuring is applicable. N.m ranging from 0.05 to 2000 n. m to choose from, high precision, good security. Widely used in pneumatic screwdriver, electric screwdriver and auto parts, mechanical arm, the robot and the torsion test. Technical Parameters ● Low accuracy: + / - 1% + 1 ● Low direction: left and right ● Low display: 7 segment LCD ● Low measurement mode: PEAK/RUN ● Low data memory: 999 ● Low computation function: sample si... -
QLS-0104 Summary Mainly used for screw tightening and loosening of torsion test, also can be installed on the device used for torque test of various kinds of products. Technical Parameters ● Capacity: 0.002 N.m - 50 N. m ● Sensitivity: 1-2mV/V ● The input/out impedance: 350Ω or 1000Ω±1% ● Insulation impedance: more than 2000 m Ω ● The effects of temperature on the zero point: ±0.01%R.O./℃ ● The effects of temperature on the output: ±0.01%/℃ ● Allow the overload : 120% R.C Product size table ... -
QLS-0103 Summary This type is mainly used for the rotating torque detection, measuring is applicable. Range from 1 n. n. m to 5000 m to choose from, high precision, good security. Widely used in pneumatic screwdriver, electric screwdriver and auto parts, mechanical arm, the robot and the torsion test. Technical Parameters ● Low rated torque: 1 n. M - 5000 n. m ● Low high torsional stiffness ● Low accuracy level of 0.1% ● Low reliable and durable ● Low marks are steering and negative ● "Easy to assembly and... -
QLS-0102 Summary This type is mainly used for the rotating torque detection, measuring is applicable. Range from 1 n. n. m to 100 m to choose from, high precision, good security. Widely used in pneumatic screwdriver, electric screwdriver and auto parts, mechanical arm, the robot and the torsion test Technical Parameters ● Low rated torque: 1 n. M - 100 n. m ● "There are two shaft end key ● Low short axial length ● Low high torsional rigidity ● Low better reliability and durability ● "Easy to assembly and p... -
QLS-0101 Summary This type is mainly used for the rotating torque detection, measuring is applicable. N.m ranging from 0.2 to 5000 n. m to choose from, high precision, good security. Widely used in pneumatic screwdriver, electric screwdriver and auto parts, mechanical arm, the robot and the torsion test. Technical Parameters ● Low capacity: 0.2 N.m - 5000 n. m ● Low output voltage: 1 mV/V + / - 1% (0.2 N.m 0.7 mV/V) ● Low non linear: 0.3% R.O. (0.2 N.m 0.5% R.O) ● Low hysteresis sex: 0.3% R.O. (0.2 N.m 0.5% R...
推薦產品 RECOMMENDED PRODUCTS
- Tel:0086-574-87834466 0086-574-87890640
- Fax:0086-574-87890641
- E-mail:sales@fff-motive.com
- Website:www.zchaoyun.com
- Add:No. 999, Mingshu Road, Jiangshan, Ningbo
Share：
